Shopping Cart

0

Your shopping bag is empty

Go to the shop

TEXET Thermal Laminator LMA3-HDX

Rs. 5,999.00 Rs. 3,999.00

The new TEXET Thermal Laminator - LMA3-HDX specially designed with rigidly built rollers for precision driven control. It is compatible with most types of laminating pouch film. This laminator is suitable for both hot and cold functions with forward and reverse operations. The Laminated documents remain completely flat and are...

The new TEXET Thermal Laminator - LMA3-HDX specially designed with rigidly built rollers for precision driven control. It is compatible with most types of laminating pouch film. This laminator is suitable for both hot and cold functions with forward and reverse operations. The Laminated documents remain completely flat and are resistant to water, fading and abrasions. 

Features: 

  • Sturdy and durable construction
  • Easy, reliable and economical operation
  • Advance and retreat functions
  • Silent and efficient drive systems
  • Wide temperature adaptability
  • Integrated chip output

    Operation: 

    • Connect the machine to the power supply (220-240 VAC, 50/60 Hz)
    • Turn the power on by switching to HOT position (8) - the power light indicator will turn red (5). The roller will start to heat up and the Ready for lamination indicator will turn green (6).
    • The temperature can be set (4) according to the pouch film thickness (See the table for indicative temperature settings).
    • If the film thickness is not known, make a test run with the temperature control set to the lowest position. Wait for 3 minutes for the heater to reach the optimum temperature during which the operating light turns green. Wait for 1 minute, the light will go Off and then switch on again. This indicates the machine is now ready for lamination.
    • Place the items between the two layers of the pouch film and always insert the closed end of the pouch film into the slot on the front side of the laminator (3).
    • The laminated item will emerge after a few seconds from the back of the laminator.
    • In case, when placing the film in the machine, the item shifts position or appears skewed, press the reverse switch (7). The film will return out. Re- positions the item properly and re-insert it into the machine.
    • The temperature adjustment is to be done according to the film thickness and material. If the temperature is too low, the laminated item will not appear clear and if the temperature is too high, the laminated document will have wrinkles. In such cases, it increases or decreases the temperature accordingly.

    Caution: 

    • Ensure the pouch film is always inserted with the sealed end, otherwise it could lead to the film wrapping around the rollers or getting crumpled.
    • Keep and store the machine in a cool and dry place away from other flammable items.
    • Do not spill water or other liquids on the machine while it is in operation.
    • Please ensure the machine is properly connected to the supply line (220-240VAC, 50/60 Hz).
    • Before turning the machine off, set the temperature control to a cold position, wait for 2 minutes and then disconnect the power. This will ensure the roller is running and cools down properly before it stops rotating.
    • Clean the rollers with a soft cloth and propel alcohol periodically to avoid film wrap and rollers.
    • Do not use benzene or other thinners for cleaning.                                               
    • Disconnect the power before opening the machine for cleaning or repairs.

       Lamination Film Thickness Suggested Temperature 

      • 80 Microns 100-110° 
      • 100 Microns   115-125° C 
      • 125 Microns   130-140° C 
      • 150 Microns   145-150° C 
      • 175 Microns 155-160° C     
      • 200 Microns   165-170° C 
      • 250 Microns 175-180° C 

      TEXET LMA3-HDX Specifications: 

      Laminating Width: 316mm Max 

      Laminating Speed: 425mm/minute 

      Operating Temperatures: 90°C to 200°C 

      Drives: AC Geared Motor 

      Heating System: IR Duartz Heater 

      RubMer Roller: 4 Nos. 

      RubMerRoller Dia: 20.5mm 

      Film Thickness: 1.2mm Max 

      Power Consumption: 540W Max (Heating Mode) 

      Voltage: 220-240 VAC, 50/60Hz 

      Dimensions(WxDxH): 445x175x95mm 

      Weight: 5kg 

       

       

       

      Manufactured and/or Marketed By 

      Texet Technologies Private Ltd,  
      S.No.78/1, Baba Khan Industrial Estate, Dangat Vasti, Shivne, Pune - 411023. Maharashtra. 

      Generic Name 

      Lamination Machine 

      Brand 

      TEXET 

      Model / SKU Code 

      LMA3-HDX 

      Net Quantity 

      1 Unit 

      Net Contents 

      Lamination Machine 1N, Instruction Manual 1N,  

      Net Weight 

      5 Kgs 

      Dimensions (L*B*H) 

      44.5cm x 17.5cm x 9.5cm 

      Voltage 

      220-240 VAC 

      Frequency 

      50/60Hz 

      Wattage 

      540 W 

      MRP 
       

      Rs. 5,999.00/- (inclusive of all taxes) 

      Month & Year of Manufacturing 

      January, 2024 

      For Feedback or Complaints, Contact 

      Customer Care Manager at Texet Technologies Pvt Ltd., S.No.78/1, Baba 
      Khan Industrial Estate, Dangat Vasti, Shivne, Pune - 411023. Maharashtra. 

      Email - info@texet.co.in 

      Contact no - 9769465202 

      Made IN 

      India 

       

      Important information about the importer and exporter

      1. Made in - P.R.C.

      2. Imported & Marketed By - Texet Technologies Private Ltd, S.No.78/1, Baba Khan Industrial Estate, Dangat Vasti, Shivne, Pune - 411023. Maharashtra.

      3. Exported By - Hira House Ltd, Unit 5, 23/F, Shun Feng Int’l Centre,182 Queen’s Road East, Wanchai, Hong Kong.

      4. For Feedback or Complaints, Contact - Customer Care Manager at Texet Technologies Pvt Ltd., S.No.78/1, Baba Khan Industrial Estate, Dangat Vasti, Shivne, Pune - 411023. Maharashtra.

      Email - info@texet.co.in

      Contact no - 9769465202